Igadget Manager 0.2.0 Free Download For Mac EXCLUSIVE
Igadget Manager 0.2.0 Free Download For Mac ->>> https://urllie.com/2ti5Uz
_____ _____ _ _ _ ___ ___ ___ ___ _ ___ ___ ____ ___ _ _ .' . . __ _ . -_ _ ______ __,_ ___ __ _ ____ _______ ___ ___Arago Project -project.org am335x-evm ttyS3Arago 2017.10 am335x-evm ttyS3am335x-evm login: rootroot@am335x-evm:#root@am335x-evm:#root@am335x-evm:#root@am335x-evm:#root@am335x-evm:#root@am335x-evm:# dmesg[ 0.000000] Booting Linux on physical CPU 0x0[ 0.000000] Linux version 4.9.59-rt23-g273202a0d3 (gtbldadm@ubuntu-16) (gcc version 6.2.1 20161016 (Linaro GCC 6.2-2016.11) ) #1 PREEMPT RT Sat Dec 23 10:46:20 EST 2017[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache[ 0.000000] OF: fdt:Machine model: TI AM3359 ICE-V2[ 0.000000] efi: Getting EFI parameters from FDT:[ 0.000000] efi: UEFI not found.[ 0.000000] cma: Reserved 48 MiB at 0x8a800000[ 0.000000] Memory policy: Data cache writeback[ 0.000000] On node 0 totalpages: 65536[ 0.000000] free_area_init_node: node 0, pgdat c0c47490, node_mem_map cfda1000[ 0.000000] Normal zone: 576 pages used for memmap[ 0.000000] Normal zone: 0 pages reserved[ 0.000000] Normal zone: 65536 pages, LIFO batch:15[ 0.000000] CPU: All CPU(s) started in SVC mode.[ 0.000000] AM335X ES2.1 (sgx neon)[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768[ 0.000000] pcpu-alloc: [0] 0[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64960[ 0.000000] Kernel command line: console=ttyO3,115200n8 root=PARTUUID=00023bfe-02 rw rootfstype=ext4 rootwait[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)[ 0.000000] Memory: 198272K/262144K available (7168K kernel code, 291K rwdata, 2400K rodata, 1024K init, 324K bss, 14720K reserved, 49152K cma-reserved, 0K highmem)[ 0.000000] Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xd0800000 - 0xff800000 ( 752 MB) lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0xc0008000 - 0xc0800000 (8160 kB) .init : 0xc0b00000 - 0xc0c00000 (1024 kB) .data : 0xc0c00000 - 0xc0c48ee0 ( 292 kB) .bss : 0xc0c48ee0 - 0xc0c99f60 ( 325 kB)[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1[ 0.000000] Preemptible hierarchical RCU implementation.[ 0.000000] RCU kthread priority: 1.[ 0.000000] NR_IRQS:16 nr_irqs:16 16[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts[ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz[ 0.000018] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns[ 0.000033] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns[ 0.000041] OMAP clocksource: timer1 at 24000000 Hz[ 0.000268] clocksource_probe: no matching clocksources found[ 0.000471] Console: colour dummy device 80x30[ 0.000654] WARNING: Your 'console=ttyO3' has been replaced by 'ttyS3'[ 0.000656] This ensures that you still see kernel messages. Please[ 0.000659] update your kernel commandline.[ 0.058778] Calibrating delay loop... 597.60 BogoMIPS (lpj=2988032)[ 0.058785] pid_max: default: 32768 minimum: 301[ 0.058958] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)[ 0.058966] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)[ 0.060059] CPU: Testing write buffer coherency: ok[ 0.060443] Setting up static identity map for 0x80100000 - 0x80100060[ 0.061977] EFI services will not be available.[ 0.063761] devtmpfs: initialized[ 0.081870] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3[ 0.082344] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns[ 0.082381] futex hash table entries: 256 (order: 1, 8192 bytes)[ 0.086676] pinctrl core: initialized pinctrl subsystem[ 0.088335] NET: Registered protocol family 16[ 0.091304] DMA: preallocated 256 KiB pool for atomic coherent allocations[ 0.110918] omap_hwmod: debugss: _wait_target_disable failed[ 0.172280] GPIO line 7 (FET_SWITCH_CTRL) hogged as output/high[ 0.172328] gpio gpiochip0: (gpio): added GPIO chardev (254:0)[ 0.172801] gpiochip_setup_dev: registered GPIOs 0 to 31 on device: gpiochip0 (gpio)[ 0.175125] OMAP GPIO hardware version 0.1[ 0.175957] gpio gpiochip1: (gpio): added GPIO chardev (254:1)[ 0.176399] gpiochip_setup_dev: registered GPIOs 32 to 63 on device: gpiochip1 (gpio)[ 0.179572] gpio gpiochip2: (gpio): added GPIO chardev (254:2)[ 0.180014] gpiochip_setup_dev: registered GPIOs 64 to 95 on device: gpiochip2 (gpio)[ 0.183085] GPIO line 100 (PR1_MII_CTRL) hogged as output/high[ 0.183118] GPIO line 106 (MUX_MII_CTL1) hogged as output/low[ 0.183145] gpio gpiochip3: (gpio): added GPIO chardev (254:3)[ 0.183604] gpiochip_setup_dev: registered GPIOs 96 to 127 on device: gpiochip3 (gpio)[ 0.195562] No ATAGs[ 0.195592] hw-breakpoint: debug architecture 0x4 unsupported.[ 0.218178] edma 49000000.edma: TI EDMA DMA engine driver[ 0.218575] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator0[0]'[ 0.219188] of_get_named_gpiod_flags: parsed 'gpio' property of node '/fixedregulator1[0]' - status (0)[ 0.223201] omap_i2c 44e0b000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/i2c0_pins_default, deferring probe[ 0.223368] media: Linux media interface: v0.10[ 0.223451] Linux video capture interface: v2.00[ 0.223511] pps_core: LinuxPPS API ver. 1 registered[ 0.223521] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.223555] PTP clock support registered[ 0.223609] EDAC MC: Ver: 3.0.0[ 0.225096] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400[ 0.225533] Advanced Linux Sound Architecture Driver Initialized.[ 0.227228] clocksource: Switched to clocksource timer1[ 0.242433] NET: Registered protocol family 2[ 0.243494] TCP established hash table entries: 2048 (order: 1, 8192 bytes)[ 0.243553] TCP bind hash table entries: 2048 (order: 3, 49152 bytes)[ 0.243686] TCP: Hash tables configured (established 2048 bind 2048)[ 0.243779] UDP hash table entries: 256 (order: 2, 16384 bytes)[ 0.243829] UDP-Lite hash table entries: 256 (order: 2, 16384 bytes)[ 0.244077] NET: Registered protocol family 1[ 0.244683] RPC: Registered named UNIX socket transport module.[ 0.244700] RPC: Registered udp transport module.[ 0.244709] RPC: Registered tcp transport module.[ 0.244717] RPC: Registered tcp NFSv4.1 backchannel transport module.[ 0.244735] PCI: CLS 0 bytes, default 64[ 0.245820] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available[ 0.249248] workingset: timestamp_bits=14 max_order=16 bucket_order=2[ 0.260716] squashfs: version 4.0 (2009/01/31) Phillip Lougher[ 0.262067] NFS: Registering the id_resolver key type[ 0.262119] Key type id_resolver registered[ 0.262130] Key type id_legacy registered[ 0.262192] ntfs: driver 2.1.32 [Flags: R/O].[ 0.264678] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)[ 0.264700] io scheduler noop registered[ 0.264710] io scheduler deadline registered[ 0.264928] io scheduler cfq registered (default)[ 0.266512] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568[ 0.359382] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled[ 0.363851] 481a6000.serial: ttyS3 at MMIO 0x481a6000 (irq = 158, base_baud = 3000000) is a 8250[ 0.953094] console [ttyS3] enabled[ 0.959029] omap_rng 48310000.rng: OMAP Random Number Generator ver. 20[ 0.965874] [drm] Initialized[ 0.987979] brd: module loaded[ 1.000513] loop: module loaded[ 1.007785] m25p80 spi1.0: found s25fl064k, expected w25q64[ 1.013412] m25p80 spi1.0: s25fl064k (8192 Kbytes)[ 1.018273] 4 ofpart partitions found on MTD device spi1.0[ 1.023788] Creating 4 MTD partitions on \"spi1.0\":[ 1.028612] 0x000000000000-0x000000080000 : \"u-boot-spl\"[ 1.035835] 0x000000080000-0x000000180000 : \"u-boot\"[ 1.042546] 0x000000180000-0x0000001a0000 : \"u-boot-env\"[ 1.049574] 0x0000001a0000-0x000000800000 : \"misc\"[ 1.057437] libphy: Fixed MDIO Bus: probed[ 1.064545] mousedev: PS/2 mouse device common for all mice[ 1.070878] i2c /dev entries driver[ 1.076354] omap_hsmmc 48060000.mmc: GPIO lookup for consumer cd[ 1.076366] omap_hsmmc 48060000.mmc: using device tree for GPIO lookup[ 1.076379] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@48060000[0]'[ 1.076389] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@48060000[0]'[ 1.076397] omap_hsmmc 48060000.mmc: using lookup tables for GPIO lookup[ 1.076407] omap_hsmmc 48060000.mmc: lookup for GPIO cd failed[ 1.076420] omap_hsmmc 48060000.mmc: GPIO lookup for consumer wp[ 1.076427] omap_hsmmc 48060000.mmc: using device tree for GPIO lookup[ 1.076435] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@48060000[0]'[ 1.076443] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@48060000[0]'[ 1.076451] omap_hsmmc 48060000.mmc: using lookup tables for GPIO lookup[ 1.076459] omap_hsmmc 48060000.mmc: lookup for GPIO wp failed[ 1.078064] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds1/led0[0]' - status (0)[ 1.078323] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds1/led1[0]' - status (0)[ 1.078498] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds1/led2[0]' - status (0)[ 1.078670] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds1/led3[0]' - status (0)[ 1.078899] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds1/led4[0]' - status (0)[ 1.079059] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds1/led5[0]' - status (0)[ 1.082321] NET: Registered protocol family 10[ 1.088733] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver[ 1.095778] NET: Registered protocol family 17[ 1.100620] Key type dns_resolver registered[ 1.105205] omap_voltage_late_init: Voltage driver support not added[ 1.147536] tps65910 0-002d: No interrupt support, no core IRQ[ 1.153683] tps65910-gpio tps65910-gpio: ti,en-gpio-sleep not specified[ 1.153712] gpiochip_find_base: found new base at 506[ 1.153749] gpio gpiochip4: (tps65910): added GPIO chardev (254:4)[ 1.154178] gpiochip_setup_dev: registered GPIOs 506 to 511 on device: gpiochip4 (tps65910)[ 1.156047] vrtc: supplied by vbat[ 1.163409] vio: supplied by vbat[ 1.168403] vdd1: supplied by vbat[ 1.173841] vdd2: supplied by vbat[ 1.180878] vdig1: supplied by vbat[ 1.185909] vdig2: supplied by vbat[ 1.190937] vpll: supplied by vbat[ 1.195870] vdac: supplied by vbat[ 1.200845] vaux1: supplied by vbat[ 1.205872] vaux2: supplied by vbat[ 1.210906] vaux33: supplied by vbat[ 1.216032] vmmc: supplied by vbat[ 1.220493] random: fast init done[ 1.224365] vbb: supplied by vbat[ 1.229514] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz[ 1.235816] omap_hsmmc 48060000.mmc: GPIO lookup for consumer cd[ 1.235828] omap_hsmmc 48060000.mmc: using device tree for GPIO lookup[ 1.235841] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@48060000[0]'[ 1.235850] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@48060000[0]'[ 1.235859] omap_hsmmc 48060000.mmc: using lookup tables for GPIO lookup[ 1.235869] omap_hsmmc 48060000.mmc: lookup for GPIO cd failed[ 1.235882] omap_hsmmc 48060000.mmc: GPIO lookup for consumer wp[ 1.235889] omap_hsmmc 48060000.mmc: using device tree for GPIO lookup[ 1.235897] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@48060000[0]'[ 1.235905] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@48060000[0]'[ 1.235912] omap_hsmmc 48060000.mmc: using lookup tables for GPIO lookup[ 1.235920] omap_hsmmc 48060000.mmc: lookup for GPIO wp failed[ 1.288002] hctosys: unable to open rtc device (rtc0)[ 1.293965] ALSA device list:[ 1.299932] No soundcards found.[ 1.307614] Waiting for root device PARTUUID=00023bfe-02...[ 1.344588] mmc0: host does not support reading read-only switch, assuming write-enable[ 1.354609] mmc0: new high speed SDHC card at address 0007[ 1.361059] mmcblk0: mmc0:0007 SL16G 14.5 GiB[ 1.367681] mmcblk0: p1 p2[ 21.161053] EXT4-fs (mmcblk0p2): recovery complete[ 21.184921] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)[ 21.193151] VFS: Mounted root (ext4 filesystem) on device 179:2.[ 21.203220] devtmpfs: mounted[ 21.208346] Freeing unused kernel memory: 1024K[ 21.465522] systemd[1]: System time before build time, advancing clock.[ 21.515702] systemd[1]: systemd 230 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)[ 21.534675] systemd[1]: Detected architecture arm.[ 21.569142] systemd[1]: Set hostname to .[ 21.916996] systemd[1]: [/lib/systemd/system/gadget-init.service:15] Unknown lvalue 'ExecStopPre' in section 'Service'[ 22.270983] systemd[1]: Listening on Process Core Dump Socket.[ 22.307978] systemd[1]: Listening on Syslog Socket.[ 22.337850] systemd[1]: Listening on Journal Socket (/dev/log).[ 22.368116] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.[ 22.407590] systemd[1]: Reached target Swap.[ 22.437873] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.[ 22.887787] cryptodev: loading out-of-tree module taints kernel.[ 22.902262] cryptodev: driver 1.8 loaded.[ 23.335470] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)[ 24.497722] systemd-journald[101]: Received request to flush runtime journal from PID 1[ 26.409132] gpio-decoder gpio-decoder: GPIO lookup for consumer (null)[ 26.409154] gpio-decoder gpio-decoder: using device tree for GPIO lookup[ 26.409186] gpio-decoder gpio-decoder: lookup for GPIO (null) failed[ 26.409197] gpio-decoder gpio-decoder: unable to acquire input gpios[ 26.658265] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec[ 26.715168] gpio-decoder gpio-decoder: GPIO lookup for consumer (null)[ 26.715185] gpio-decoder gpio-decoder: using device tree for GPIO lookup[ 26.715218] gpio-decoder gpio-decoder: lookup for GPIO (null) failed[ 26.715230] gpio-decoder gpio-decoder: unable to acquire input gpios[ 26.728595] rtc rtc0: 44e3e000.rtc: dev (253:0)[ 26.728634] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0[ 26.890809] gpio-decoder gpio-decoder: GPIO lookup for consumer (null)[ 26.890825] gpio-decoder gpio-decoder: using device tree for GPIO lookup[ 26.890858] gpio-decoder gpio-decoder: lookup for GPIO (null) failed[ 26.890869] gpio-decoder gpio-decoder: unable to acquire input gpios[ 26.927109] pisosr-gpio spi1.1: GPIO lookup for consumer load[ 26.927119] pisosr-gpio spi1.1: using device tree for GPIO lookup[ 26.927203] of_get_named_gpiod_flags: parsed 'load-gpios' property of node '/ocp/spi@48030000/sn65hvs882@1[0]' - status (0)[ 26.948623] gpiochip_find_base: found new base at 498[ 26.948682] gpio gpiochip5: (pisosr-gpio): added GPIO chardev (254:5)[ 26.949283] gpiochip_setup_dev: registered GPIOs 498 to 505 on device: gpiochip5 (pisosr-gpio)[ 26.959341] 0-0041 supply vcc not found, using dummy regulator[ 26.991646] gpiochip_find_base: found new base at 494[ 26.991699] gpio gpiochip6: (pca9536): added GPIO chardev (254:6)[ 26.992280] gpiochip_setup_dev: registered GPIOs 494 to 497 on device: gpiochip6 (pca9536)[ 26.992449] gpiochip_find_base: found new base at 486[ 26.992475] gpio gpiochip7: (tpic2810): added GPIO chardev (254:7)[ 26.992899] gpiochip_setup_dev: registered GPIOs 486 to 493 on device: gpiochip7 (tpic2810)[ 27.145905] gpio-decoder gpio-decoder: GPIO lookup for consumer (null)[ 27.145923] gpio-decoder gpio-decoder: using device tree for GPIO lookup[ 27.145960] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-decoder[0]' - status (0)[ 27.147577] gpio-decoder gpio-decoder: GPIO lookup for consumer (null)[ 27.147593] gpio-decoder gpio-decoder: using device tree for GPIO lookup[ 27.147675] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-decoder[1]' - status (0)[ 27.147939] gpio-decoder gpio-decoder: GPIO lookup for consumer (null)[ 27.147949] gpio-decoder gpio-decoder: using device tree for GPIO lookup[ 27.148004] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-decoder[2]' - status (0)[ 27.148218] gpio-decoder gpio-decoder: GPIO lookup for consumer (null)[ 27.148227] gpio-decoder gpio-decoder: using device tree for GPIO lookup[ 27.148291] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-decoder[3]' - status (0)[ 27.148917] input: gpio-decoder as /devices/platform/gpio-decoder/input/input0[ 28.817541] omap-sham 53100000.sham: hw accel on OMAP rev 4.3[ 28.878464] ti-pruss 4a300000.pruss: creating PRU cores and other child platform devices[ 28.896449] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle[ 29.019956] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2[ 29.032515] remoteproc remoteproc0: wkup_m3 is available[ 29.059914] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle[ 29.073416] davinci_mdio 4a332400.mdio: GPIO lookup for consumer reset[ 29.073428] davinci_mdio 4a332400.mdio: using device tree for GPIO lookup[ 29.073460] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/ocp/pruss_soc_bus@4a326000/pruss@4a300000/mdio@4a332400[0]' - status (0)[ 29.077039] omap-aes 53500000.aes: will run requests pump with realtime priority[ 29.077606] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle[ 29.103207] PM: Cannot get wkup_m3_ipc handle[ 29.127556] davinci_mdio 4a332400.mdio: davinci mdio revision 1.6[ 29.127568] libphy: 4a332400.mdio: probed[ 29.147577] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle[ 29.148156] PM: Cannot get wkup_m3_ipc handle[ 29.333919] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle[ 29.334560] davinci_mdio 4a332400.mdio: phy[1]: device 4a332400.mdio:01, driver TI TLK10X 10/100 Mbps PHY[ 29.334570] davinci_mdio 4a332400.mdio: phy[3]: device 4a332400.mdio:03, driver TI TLK10X 10/100 Mbps PHY[ 29.335627] PM: Cannot get wkup_m3_ipc handle[ 29.360168] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle[ 29.406585] remoteproc remoteproc1: 4a334000.pru0 is available[ 29.406707] pru-rproc 4a334000.pru0: PRU rproc node /ocp/pruss_soc_bus@4a326000/pruss@4a300000/pru@4a334000 probed successfully[ 29.407035] PM: Cannot get wkup_m3_ipc handle[ 29.410185] remoteproc remoteproc2: 4a338000.pru1 is available[ 29.410283] pru-rproc 4a338000.pru1: PRU rproc node /ocp/pruss_soc_bus@4a326000/pruss@4a300000/pru@4a338000 probed successfully[ 29.449396] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle[ 29.450380] PM: Cannot get wkup_m3_ipc handle[ 29.473347] prueth pruss_eth: could not get ptp tx irq[ 29.478450] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle[ 29.533168] Bluetooth: Core ver 2.22[ 29.533281] NET: Registered protocol family 31[ 29.533286] Bluetooth: HCI device and connection manager initialized[ 29.533312] Bluetooth: HCI socket layer initialized[ 29.533330] Bluetooth: L2CAP socket layer initialized[ 29.533379] Bluetooth: SCO socket layer initialized[ 29.568306] prueth pruss_eth: could not get ptp tx irq[ 29.670678] prueth pruss_eth: TI PRU ethernet (type 0) driver initialized[ 29.690504] PM: Cannot get wkup_m3_ipc handle[ 29.727462] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle[ 31.370935] PM: Cannot get wkup_m3_ipc handle[ 31.491030] remoteproc remoteproc0: powering up wkup_m3[ 31.497114] PM: Cannot get wkup_m3_ipc handle[ 31.601071] remoteproc remoteproc0: Booting fw image am335x-pm-firmware.elf, size 224268[ 31.616205] remoteproc remoteproc0: remote processor wkup_m3 is now up[ 31.616261] wkup_m3_ipc 44e11324.wkup_m3_ipc: CM3 Firmware Version = 0x192[ 44.518656] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.[ 45.185924] NET: Registered protocol family 15[ 46.222184] Initializing XFRM netlink socket[ 46.803894] udc-core: couldn't find an available UDC - added [g_multi] to list of pending drivers[ 47.064126] random: crng init done[ 54.710327] PM: bootloader does not support rtc-only![ 55.369694] remoteproc remoteproc1: powering up 4a334000.pru0[ 55.393074] remoteproc remoteproc1: Booting fw image ti-pruss/am335x-pru0-prueth-fw.elf, size 5432[ 55.413817] ti-pruss 4a300000.pruss: configured system_events = 0x0000060000500000 intr_channels = 0x00000095 host_intr = 0x00000115[ 55.447495] remoteproc remoteproc1: remote processor 4a334000.pru0 is now up[ 55.467923] net eth0: started[ 55.483519] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready[ 55.547928] remoteproc remoteproc2: powering up 4a338000.pru1[ 55.566321] remoteproc remoteproc2: Booting fw image ti-pruss/am335x-pru1-prueth-fw.elf, size 5508[ 55.575672] ti-pruss 4a300000.pruss: configured system_events = 0x0060000000a00000 intr_channels = 0x0000012a host_intr = 0x0000022a[ 55.617956] remoteproc remoteproc2: remote processor 4a338000.pru1 is now up[ 55.637902] net eth1: started[ 55.653537] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not readyroot@am335x-evm:#root@am335x-evm:#root@am335x-evm:# [ 106.407966] prueth pruss_eth eth0: Link is Up - 100Mbps/Full - flow control rx/tx[ 106.415587] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready[ 114.017225] sched: RT throttling activatedroot@am335x-evm:# [ 116.069517] NOHZ: local_softirq_pending 10e[ 117.031421] NOHZ: local_softirq_pending 08[ 117.037319] NOHZ: local_softirq_pending 08[ 117.047241] NOHZ: local_softirq_pending 08[ 117.054498] NOHZ: local_softirq_pending 08[ 117.057245] NOHZ: local_softirq_pending 08[ 117.067235] NOHZ: local_softirq_pending 08[ 119.028061] NOHZ: local_softirq_pending 08[ 119.037272] NOHZ: local_softirq_pending 08[ 119.038139] NOHZ: local_softirq_pending 08 153554b96e
https://www.ceherworld.com/forum/travel-forum/sqli-dumper-v8-upd-cracked-heels